This 5 pack of Thermal Pads offers a suitable alternative to using heatsink paste/grease. The thermal pads remain solid at room temperature, and soften at heatsink operating temperatures – eliminating the mess of heat grease, while maximizing heat conduction to create a cooler operating environment for your hard working CPU.
CHECK PRICE NOW!
Read Full Review >>
This 2 Pack of heatsinks can be used for PC, or to fit on XBOX 360 ANA and southbridge chips, aiding repair for E74, freezing and pixelation.
The heatsinks in this 2 pack each measure 25mm x 25mm x 4mm high.
CHECK PRICE NOW!
Read Full Review >>
ArctiClean is a two-step cleaning process that removes existing thermal grease or pads and prepares the thermal surface for a fresh application of thermal interface material. ArctiClean is a specially formulated product to remove TIM from heatsinks and electronics.
Features:
Unique 2-Step Process
ArctiClean 1 Thermal Material Remover quickly emulsifies and dissolves the existing thermal grease or pad from the CPU and/or heatsink so that it can easily be removed with a clean cloth or paper towel. A few drops of ArctiClean 2 Thermal Surface Purifier and some gentle wiping then removes the remaining residue and inhibits flash corrosion on copper or aluminum.
ArctiClean 1 Thermal Material Remover
ArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads. The citrus and soy based solvents in ArctiClean 1 match or exceed many hazardous and volatile solvents such as fluorinated and chlorinated organic solvents, acetone, MEK (methyl ethyl ketone), mineral spirits, isopropyl alcohol, and toluene.
ArctiClean 2 Thermal Surface Purifier
The cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material. It also incorporates advanced flash corrosion inhibitors that minimize the corrosion layer on copper and aluminum allowing for more intimate contact between the thermal interface material and the heatsink.
Using ArctiClean 2 With Other Solvents
Most solvents and cleaning products leave residue on the CPU and heatsink that negatively affects the performance of any subsequently applied thermal interface material. ArctiClean 1 Thermal Surface Purifier removes the residue of citrus or petroleum based cleaners and inhibits flash corrosion on a copper or aluminum heatsink.
CHECK PRICE NOW!
Read Full Review >>
Contains 99.9% pure silver: Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer.
Not Electrically Conductive: Arctic Silver 5 was formulated to conduct heat, not electricity.
(While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)
Absolute Stability: Arctic Silver 5 will not separate, run, migrate, or bleed.
Performance: 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: The 3.5 gram tube contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates.
Important Reminder:Â Due to the unique shape and sizes of the particles in Arctic Silver 5′s conductive matrix, it will take a up to 200 hours and several thermal cycles to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the heatsink or with a low speed fan on the heatsink.) On systems measuring actual internal core temperatures via the CPU’s internal diode, the measured temperature will often drop 2C to 5C over this “break-in” period. This break-in will occur during the normal use of the computer as long as the computer is turned off from time to time and the interface is allowed to cool to room temperature. Once the break-in is complete, the computer can be left on if desired.
CHECK PRICE NOW!
Read Full Review >>
Arctic Silver Thermal (not retail packaged) Adhesive features: Made with 99.8% pure micronized silver. 62% to 65% silver content by weight. Superior thermal conductivity. Greater than 7.5 W/m°K Temperature range: – 40C to >150C (Bond strength is weakened at very low temperatures due to crystallization.) Negligible electrical conductivity. Arctic Silver Thermal Adhesive was formulated to conduct heat, not electricity. Even though Arctic Silver Thermal Adhesive is specifically engineered for high electrical resistance, it should be keep away from electrical traces, pins, and leads. The cured adhesive is slightly capacitive and could potentially cause problems if it bridged two close-proximity electrical paths. A set of Arctic Silver Thermal Adhesive consists of two tubes containing a total of 7 grams of adhesive (3.5 grams of Part A and 3.5 grams of Part
CHECK PRICE NOW!
Read Full Review >>
Made with 99.8 % pure micronized silver 62% to 65% silver content by weight. Superior thermal conductivity.
Greater than 7.5 W/m.
Temperature range:40cto 150c.
Great for light weight chipset heatsink.
CHECK PRICE NOW!
Read Full Review >>
Characteristics:
Arctic Alumina Adhesive uses a layered composite of aluminum oxide and boron nitride.
Arctic Alumina Adhesive is a pure electrical insulator, neither electrically conductive nor capacitive.
A set of Arctic Alumina Thermal Adhesive consists of two tubes containing a total of 5 grams of adhesive (2.5 grams each of parts A and B) and a plastic reusable mixing wand. (Approximately 3cc total adhesive.)
Although lighter per set than Arctic Silver Adhesive due to its use of ceramics rather than silver, each set of Arctic Alumina Adhesive  contains the same amount of adhesive by volume as a set of Arctic Silver adhesive and will cover the same area.
Compliancy:
RoHS Compliant.
CHECK PRICE NOW!
Read Full Review >>
